PCI-e Motherboard Test Card Maintenance Test Tool Fault Detection Card

Description

PCI-e motherboard test card maintenance test tool fault detection card PCI-e diagnostic card
Simple Debug LED Lamp
1. Standby 3VSB is the power display lamp.
2. Digital tube scintillation decimal point is clock signal display
3. PCI-E RST/PCI RST is the main board reset the signal display.
4. CPU Debugging Light Indicates CPU Module Failure
5. DRAM debug light indicates memory module failure.
6. VGA Debugging Lamp Indicates Failure of Display Card Module
7. HDD/PCH = Universal Debugging Lamp Universal Indicator Hard Disk/Nanqiao/Beiqiao/USB/SATA and other modules are faulty
To correctly place the TL460s Plus card in the motherboard, the TL460s Plus motherboard LPC interface introduce.
The LPC1 of the TL460s Plus card, the interface LPC2 interface the motherboard
and the LPC interface has two pairs of starting points, and the triangular indication is Pin1.
TL460s PLus Simple Detecting LED Light
1. Standby 3VSB is the power indicator light, 2. Digital tube flashing decimal point is the clock signal display
3. PCI-E RST/PCI RST is the motherboard reset signal display, 4. CPU debug LED indicates that the CPU module is faulty.
5. DRAM error detection lamp indicates that the memory module is faulty, and the 6.VGA error detection lamp shows that the graphics card module is defective.
7.HDD/PCH=General Debug Lamp General indicates that the hard disk/Southbridge/Northbridge/USB/SATA and other modules are faulty.
TL460s Plus card interface and motherboard LPC interface is wrong, can be plugged in.TL460s Plus card first for the first LPC interface of the motherboard can be.
More motherboard LPC interfaces, some pins do not need to deal with it.
Partial error code display